Free shipping for products over $1500
We sell and service the Profitec dual-boiler range from our Brisbane workshop, so this review comes from working on these machines on the bench — not from reading a spec sheet. If you're researching the Profitec Pro 700, there's one thing worth knowing before you go any further: it's been superseded. Profitec has replaced it in the current range with the Profitec Drive, and that's the machine you'd actually buy today. So this review does two things — it gives the Pro 700 a fair, honest look at what made it a benchmark German dual boiler for years, and it tells you exactly what to buy instead, with live AUD pricing. Both the Pro 700 and its successor are machines we know inside out, and you can see the current Profitec dual boilers in person in our Woolloongabba showroom.
The Pro 700 was, for a long stretch, the machine a lot of enthusiasts pictured when they thought "serious home espresso." It's a German-built E61 dual boiler with a quiet rotary pump, PID temperature control, and full plumb-in capability — the complete prosumer package, built in stainless to run for decades. Two independent boilers meant you could brew and steam at the same time without either side robbing heat from the other, and the rotary pump gave it the low, smooth hum and steady pressure that separate a proper machine from an entry-level one.
Here's the verified spec snapshot for the Pro 700:
| Spec | Profitec Pro 700 |
|---|---|
| Boiler | Dual boiler — 0.75L brew + 2.0L steam, each PID-controlled |
| Group | E61, 58mm, mechanical pre-infusion |
| Pump | Rotary (16 bar max) |
| Temperature | PID control screen |
| Water | 3L reservoir or direct plumb-in |
| Dimensions (W×D×H) | ~340 × 475 × 419 mm |
| Weight | ~31 kg |
| Power | 1400–1500 W |
| Build origin | Germany |
People still search the Pro 700 because it earned its reputation honestly — it was one of the definitive E61 dual boilers of its generation, and plenty of them are still going strong on benches around the country. If you own one, it's a machine worth keeping and servicing. If you're shopping for one new, though, the range has moved on — and the rest of this review explains where it went.
To understand the Pro 700 you have to understand the company that makes it. Profitec and ECM are German brands that share manufacturing heritage — sister brands built under the same group, with engineering DNA in common but tuned differently in PID firmware, boiler sizing and styling. That's why a Profitec dual boiler and an ECM Synchronika feel like cousins rather than clones: same family, different personalities.
The Pro 700 sat in the rotary-pump dual-boiler bracket — the "lifetime machine" category — alongside the Synchronika, the Bezzera Duo DE and Lelit's Bianca. These are the machines people buy once and keep, because a stainless dual boiler with a rotary pump and an E61 group head isn't a stepping stone; it's a destination. If you're still deciding whether a dual boiler is even the right architecture for you, our HX vs dual boiler guide walks through the trade-off. The Pro 700's job in that line-up was to be the no-nonsense German option: less about gadgets, more about doing the fundamentals — temperature stability, steam power, build — properly.
Profitec dual boilers are built the way you want a machine at this level built: a stainless chassis, stainless boilers, an E61 group bolted to a serious frame, and components laid out to be serviced rather than sealed away. At roughly 31 kg the Pro 700 has the planted, doesn't-budge weight of equipment meant to last, and the fit and finish is exactly what German manufacturing implies. These are 20-years-and-more machines with routine care.
From the bench, what we see on Profitec dual boilers is reassuringly boring — they're reliable, and the one preventative issue that actually ages them is scale. That's true of any dual boiler, and it's entirely avoidable. Run the machine on filtered or softened water and descale on schedule, and the things that retire a machine early simply don't happen. We recommend water filtration on any machine at this level; it's the single biggest thing you can do to protect the boilers and the group.
On service, this is where a local dealer matters. We're an authorised Profitec dealer and we service the full Profitec range in-house at our Brisbane workshop — including older Pro 700 machines — and we stock the common wear parts: group gaskets, solenoid valve kits, pump seals and pressure gauges. A grey-import bought cheaper from overseas lands you with no local warranty and a long parts wait when something needs attention. You can read how we handle servicing on our Brisbane service and repairs page.
The Pro 700 brews like the textbook E61 dual boiler it is. Two independent boilers with separate PIDs mean brew temperature and steam pressure are set and held separately, so you can brew and steam milk at the same time with no dip on either side — the whole reason to own a dual boiler. The 2.0L steam boiler gives real headroom for back-to-back milk drinks, and the 0.75L brew boiler holds temperature well shot to shot once the machine is settled.
Where the Pro 700 shows its age is warm-up and profiling. This is a classic E61 group with a thermosyphon feeding it, which means it wants a proper warm-up — allow around 30 to 40 minutes from cold for full thermal stability, and a short cooling flush through the group before the first shot to settle the temperature. That's the E61 ritual, and for a lot of buyers it's part of the appeal — but it's genuinely slower to be shot-ready than newer designs.
The bigger gap is flow control. The Pro 700 has no built-in flow control — no way to shape pressure across the shot from the machine itself. Enthusiasts fitted third-party paddles, but out of the box the Pro 700 gives you excellent, consistent espresso with no pressure-profiling ceiling to grow into. Neither of those was a flaw in its day. Both are exactly what the machine that replaced it fixes.
Profitec's answer to everything the Pro 700 couldn't do is the Profitec Drive — and it's the machine to buy if you came here for the Pro 700. It keeps the DNA that made the Pro 700 great: a German-built stainless dual boiler (0.75L brew, 2.0L steam), a quiet rotary pump, an E61-style group, and tank-or-plumb-in flexibility. Then it adds the modern features the Pro 700 never had.
The headline is built-in flow control — a flow profile valve integrated into the machine, so you can adjust water flow during the shot and shape pressure across the extraction without any third-party hardware. On top of that the Drive brings active and passive pre-infusion for gentler shot ramps, dual PID for independent boiler control, an OLED display with a second-by-second shot timer so you can actually see what the machine is doing, and a programmable Fast Heat-Up mode that clears the single biggest complaint about the old E61 warm-up. Add programmable on/off scheduling and ECO mode and you have a machine that's ready when you are.
The live AUD price on the Drive is $5,599 on sale (or $6,000 RRP). That makes it the natural buy for a Pro 700 researcher today: same rotary-pump dual-boiler core you were shopping for, plus flow control, a fast heat-up and a proper shot timer, at a current price with Australian warranty and in-house service. If your budget sits below it, Profitec's Pro 600 and RIDE sit under the Drive in the range and are worth a look for context.
The one machine every Pro 700 researcher should cross-shop against the Drive is the sister-brand ECM Synchronika II — same German manufacturing family, same rotary-pump dual-boiler bracket, roughly the same money. Here's the honest split, no false balance.
What the Drive gains: built-in flow control as standard, an OLED shot timer, active and passive pre-infusion, and a Fast Heat-Up mode — usually at a slightly lower price ($5,599 on sale versus the Synchronika's ~$5,849). If you want modern features baked in and the shortest path to pressure profiling, the Drive is the more machine for the money.
What the Synchronika gains: the longer track record in Australia and the more established name in this bracket. Its flow control is an optional OEM ECM kit rather than a built-in valve — you fit it at purchase or add it later — so the ceiling is there, just not standard. If the established badge and the ECM ecosystem matter more to you than built-in features, it's the pick.
Choose the Drive for built-in flow control and modern features at a slightly lower price; choose the Synchronika for the longer-established name. If you're weighing the Synchronika against Lelit's flagship as well, we've covered that at ECM Synchronika vs Lelit Bianca. We have the current Profitec and ECM dual boilers on the floor in Brisbane so you can compare them side by side.
If you came here for the Profitec Pro 700, the honest answer is that it earned its reputation — a rotary-pump German dual boiler built to last decades — but it's been replaced. The machine to buy now is the Profitec Drive: the same rotary-pump dual-boiler core, plus built-in flow control, dual PID, a fast heat-up mode and an OLED shot timer, at $5,599. If you want the longer-established name at a similar price, the ECM Synchronika II is the sister-brand alternative worth comparing side by side. Either way, both are sold and serviced in our Brisbane workshop.
The best way to decide is to see them in person. Visit our Woolloongabba showroom to compare the Drive and the Synchronika side by side, or call us on 1300 550 927 and we'll talk you through it. Check the current price on the Profitec Drive shop page.
The Pro 700 has been superseded in Profitec's range. Its place is now taken by the Profitec Drive, a rotary-pump dual boiler that keeps everything the Pro 700 was known for and adds built-in flow control, dual PID, a fast heat-up mode and an OLED shot timer. We sell and service the current Profitec dual-boiler range in Brisbane and can advise on the right replacement for your needs.
Both are German E61 dual boilers with rotary pumps and PID temperature control. The Drive is the newer design: it adds a built-in flow control valve for pressure profiling, active and passive pre-infusion, a Fast Heat-Up mode, and an OLED display with a second-by-second shot timer. In short, the Drive gives you the Pro 700's build and dual-boiler performance plus the modern features the Pro 700 never had.
Profitec and ECM are German brands that share manufacturing heritage — they are sister brands built under the same group. The machines share engineering DNA but are tuned differently in PID firmware, boiler sizing and aesthetics. That is why a Profitec dual boiler and an ECM Synchronika feel like cousins rather than clones.
Both are rotary-pump German dual boilers in the same price bracket. The Drive includes built-in flow control, an OLED shot timer and a fast heat-up mode, usually at a slightly lower price. The Synchronika has the longer track record in Australia and takes ECM's optional OEM flow-control kit. Choose the Drive for built-in flow control and modern features; choose the Synchronika for the established name. We have both on the floor in Brisbane to compare.
Yes. Our Brisbane workshop services the full Profitec range, including older Pro 700 machines, and we stock the common wear parts — group gaskets, solenoid valve kits, pump seals, and pressure gauges. You can also see the current Profitec dual boilers in person in our Woolloongabba showroom before you buy.
