Free shipping for products over $1500
Two machines, the same $4,400 RRP, and two different ideas of what a home espresso machine should be. The Profitec Move leans into modern convenience — a true dual boiler, OLED screen, scheduled on/off, auto-clean, adjustable pre-infusion. The Bezzera Nini DE leans the other way — a simpler, tougher, heat-stable machine with less electronics, backed by parts and a workshop right here in Australia.
We import Bezzera ourselves and service both brands in our Brisbane workshop, so this isn't a spec-sheet read off two websites. It's the head-to-head we give customers with these two on their final shortlist — corrected specs, the real running-cost picture, and where each dollar of that $4,400 goes. We'll give the Move fair credit where it earns it. But for most buyers thinking about the next ten years, not just the first ten minutes, the Nini is the smarter money.
Buy the Bezzera Nini DE if: you want one-touch volumetric single and double shots, a machine that's cheaper to live with, faster to a shot, simpler to service, and backed by Bezzera parts we hold in Brisbane — and you'd rather spend on build than on screens.
Buy the Profitec Move if: you want the modern conveniences — a true dual boiler with fully independent brew and steam temperature control, scheduled on/off so it's ready when you wake, auto-clean, an OLED display, and adjustable pre-infusion out of the box.
Our lean: for most buyers, the Nini. Both make excellent espresso, but the Nini heats up quicker, has fewer electronics to fail, costs less to service, and — right now — is the cheaper of the two on sale. The Move's convenience features are genuine and worth paying for if they matter to you. For everyone else, the Nini is the better long-term money.
| Spec | Bezzera Nini DE PID | Profitec Move |
|---|---|---|
| Price AUD | $3,900 sale / $4,400 RRP | $4,199 sale / $4,400 RRP |
| Boiler type | Heat exchanger (HX) | True dual boiler |
| Boiler size | 1.5L HX | 0.4L brew / 0.75L steam |
| Boiler material | Copper | Brass brew / stainless steam |
| Pump | Vibration | Vibration |
| Volumetric dosing | Yes — one-touch single & double | Yes |
| Water tank | 3L | 2.8L |
| Plumbable | No | No |
| PID | Yes | Yes |
| Display | Button controls (no screen) | OLED |
| Shot timer | Yes | Yes |
| Flow control | Optional kit (some builds factory-fitted) | No |
| Heat-up time | ~6 min (heated group head) | ~9 min (fast heat-up mode) |
| Pre-infusion | Yes — basic (programmable solenoid pause) | Yes — adjustable |
| Scheduled on/off | No | Yes |
| Auto-clean / backflush | No | Yes |
| Accessories | Standard | Bottomless portafilter + silicone attachment, walnut |
| AU support | Local stock, in-house parts, 2-yr in-house warranty | Authorised stockist / service agent |
A quick note on that table, because a lot of what's online about these two is wrong. The Move's brew boiler is brass (0.4L), not stainless — only the 0.75L steam boiler is stainless. The Nini is button-controlled, not a screen machine. And the heat-up figures often get flipped — more below, because it goes the Nini's way.
If you take one thing from this comparison, take this. The Nini and the Move answer two different questions, and almost everything else follows from which one is yours.
The Profitec Move is a feature machine. Its pitch is modern convenience: a true dual boiler, an OLED interface, a schedule so it's hot when you reach the kitchen, an auto-clean cycle, adjustable pre-infusion. If you love a machine that does more for you and shows you more, the Move is genuinely well thought out, and those features are real value.
The Bezzera Nini DE is a build machine. Its pitch is longevity and simplicity: fewer electronic components, a single heating element, a copper HX that holds heat like a stone, metal group handles and metal portafilter spouts instead of silicone, and a heavier body that doesn't shuffle on the bench when you knock a portafilter home. Every part it doesn't have is a part that can't fail — and that quietly saves you money for years after the sale.
Don't mistake "simple" for stripped-back, though. The Nini we sell is fully volumetric — one-touch programmable single and double shots. Dial in your doses once, then press one button and walk away while it delivers the same shot every time. That's the daily-driver convenience that actually matters every morning, and the Nini has it without asking you to pay for screens and scheduling you may never use.
Bezzera has built espresso machines in Milan for around 125 years — Luigi Bezzera filed the patent that started modern espresso back in 1901. The Nini is hand-assembled there with parts made in-house. That heritage is why the machine is built the way it is, and why we can hold its service parts here in Brisbane.
One machine gives you more features. The other gives you fewer failure points. Neither is wrong — the rest of this comparison is really just that trade-off in detail.
Here the two machines are built on different architectures, so be careful with any comparison that implies a like-for-like "bigger boiler."
The Nini is a heat exchanger (HX) — a single 1.5L insulated copper boiler that heats steam water while passing fresh brew water through a heat-exchange tube on demand. It brews and steams at the same time, just like the Move, so you're never waiting to switch between a shot and milk. The upside of all that copper is thermal mass: more brew-water buffer before a refill, and drier, more stable steam. The one HX trait to know is that brew and steam temperature aren't fully independent — it's one boiler doing both jobs, so dialling the brew temperature down with the PID can nudge the steam on tap. In practice that rarely bites, because the Nini's 1.5L boiler is roughly double the Move's 0.75L steam boiler, so there's plenty in reserve.
The Move is a true dual boiler — a separate 0.4L brew boiler and 0.75L steam boiler, each with its own temperature control. Its real edge is independence: brew and steam temperatures are set separately, with no interaction between them. If you like to fine-tune brew temperature by the degree without a thought for what it does to steam, the dual boiler is the more precise tool.
In the cup, both steam well, both brew and steam at once, and both make excellent espresso. The honest split: the Nini gives you drier steam and more buffer from its bigger copper mass; the Move gives you fully independent brew and steam temperature control. Not sure which architecture suits how you make coffee? Our HX vs dual boiler guide walks through it properly.
This is the Nini's strongest ground, and it's the part most spec sheets skip — because it's about the years after you buy, not the day you unbox.
Heat-up actually favours the Nini. It uses the same heated group head as our BZ10 and BZ16 — an electric element built into the group itself — and it's ready in around 6 minutes. The Move's marketed fast heat-up mode is closer to 9 minutes. Older comparisons sometimes hand the Move the speed tick; on the current machines it's the Nini that gets you to a shot quicker. The Move's convenience story is scheduling, auto-clean and the OLED — not warm-up speed.
Fewer electronics, fewer failure points. The Nini runs a single heating element and a much simpler electronic package. The Move's dual boilers, OLED, scheduling and auto-clean are lovely to use, but each is another component with a service life. Over ten years, the simpler machine is the cheaper one to keep running.
Parts and service are the clincher. We import Bezzera ourselves and hold the common Nini wear parts — seals, gaskets, valves, the usual service items — here in Brisbane. Warranty is 2 years in-house, and there's no waiting on parts from overseas. We service the Move too, but as an authorised stockist and service agent, its parts come one step further down the supply chain than the Bezzera parts we hold ourselves.
A few more practical Nini wins: metal portafilter spouts (easier to tamp against than silicone), an optional drain hose to plumb the waste away, and it's flow-control-ready — the genuine Bezzera OEM flow-control kit retrofits, and some builds come factory-fitted. The Move has no flow-control option at all. If shaping a shot by hand is something you might grow into, that door stays open on the Nini and shut on the Move. (More in our flow control guide.)
Now the Move's turn, because this is where it genuinely pulls ahead.
Worth keeping honest, though: the Nini isn't bare-bones — it matches the Move on the one convenience most people use daily, one-touch volumetric single and double shots. The Move's real extras are scheduling, auto-clean, the OLED and adjustable pre-infusion. If that list reads like the machine you want, the Move is a well-designed, feature-rich dual boiler that earns its price. The only question is whether those extras matter more to you than the Nini's simplicity, service and running cost.
Both list at the same $4,400 RRP — that's the whole reason this comparison is interesting. Same money, genuinely different machines.
Right now the sale prices are:
So at sticker they're level, and on sale the Nini is currently the cheaper — before you get to running cost. Where each dollar goes is the real story. On the Move, a chunk of that $4,400 buys features: the second boiler, the OLED, the scheduling and auto-clean electronics. On the Nini, more of it goes into build — copper HX, heated group, metal fittings, heavier body — and into a machine that's cheaper to service and backed by parts we hold in-house.
Neither is bad value. But measured over the life of the machine rather than the spec sheet on day one, the Nini stretches the dollar further.
Both machines are excellent and we're happy to put either on your bench. Let the profiles decide.
Buy the Bezzera Nini DE if: - You want one-touch volumetric single and double shots — program the doses once, then press and walk away - You want the lower total cost of ownership — fewer electronics, single element, in-house Bezzera parts - You value build and heat stability over screens and scheduling - You want the shortest line to Australian parts and service, held in Brisbane - You might grow into flow control (genuine Bezzera OEM kit) and want that upgrade path left open - You'd like the cheaper machine on sale right now, too
Buy the Profitec Move if: - You want the modern conveniences — scheduled on/off, auto-clean, OLED - Fully independent brew and steam temperature control matters to you - Adjustable pre-infusion out of the box appeals - You like the bottomless portafilter and walnut accessories in the box
We'll say plainly that we lean Nini for most buyers — it's the tougher, simpler, cheaper-to-run machine and it's the one we import and support directly. But if the Move's feature list is describing exactly how you want to make coffee, it's a genuinely good machine and we'll set you up on it happily.
Neither is objectively better — they're built for different priorities. The Move is the feature machine (true dual boiler, OLED, scheduling, auto-clean, adjustable pre-infusion). The Nini is the build machine (simpler, tougher, faster to heat, cheaper to service). For most buyers we lean to the Nini on durability, service and long-term value; if the Move's conveniences are what you're after, it's an excellent machine too.
The Nini. It has fewer electronic components and a single heating element, so there's simply less that can fail over the years. And because we import Bezzera ourselves, we hold the common Nini wear parts here in Brisbane — so service is quicker, with no waiting on parts from overseas.
Both steam well, and both brew and steam at the same time — the Nini's heat exchanger doesn't make you choose. The real difference is temperature control: the Move runs separate brew and steam boilers, so their temperatures are fully independent; the Nini is a single HX, so dialling brew temperature down can slightly affect the steam on tap. That rarely matters in practice, because the Nini's 1.5L boiler is about double the Move's 0.75L steam boiler and gives drier steam with plenty of buffer. For most households either is more than enough.
The Nini, yes — it's flow-control-ready and takes the genuine Bezzera OEM flow-control kit, which retrofits, with some builds factory-fitted. The Move has no flow-control option. If shaping the shot by hand is something you might grow into, the Nini keeps that door open.
Yes. The Bezzera Nini DE comes with a 2-year in-house warranty and local parts, because we import Bezzera ourselves and hold stock in Brisbane. The Profitec Move is supported as an authorised stockist and service agent — we service it in-house too, its parts just come one step further down the supply chain.
Same $4,400, two very different machines — and the best way to choose is to see them side by side. Come into our Brisbane showroom to compare the Nini and the Move in person, feel the difference in the build and the controls, and talk it through with someone who services both. If you'd rather do that over the phone, call us on 1300 551 626.
Browse the Bezzera Nini DE in stainless or black, or the Profitec Move in our online store.
See also: - HX vs dual boiler: which should I buy? — the architecture question underneath this whole comparison, in full. - Flow control espresso machines explained — what the Nini's Bezzera OEM flow-control kit actually does for your shot. - Bezzera espresso machines in Australia — the full Bezzera range and why we import them. - Profitec coffee machines — the wider Profitec lineup if the Move has your eye.
